Tel: +86-20-86181657
Email: sales@sunrans.com
Share to：
You can submit your requirements here
Ultimate Large Luxury Acrylic Swim Spa SR859 for Villa Hotel
Size:
Product dimension:4000mmx2200mmx950/1400mm
Product dimension4100mmx2200mmx1400mm
seat capacity: 6 Persons
Gross weight: 1650kg
Packing dimension:4100*2300*1500mm
Packing dimension 4200mmx2300mmx1500mm
Container load: 0pc/ 20GP; 1pc/ 40ft
- Parameters
seat capacity: 6 Persons
Gross weight: 1650kg
Packing dimension:4100*2300*1500mm
Packing dimension 4200mmx2300mmx1500mm
Container load: 0pc/ 20GP; 1pc/ 40ft
Product Overview
The SR859 represents the pinnacle of residential aquatic wellness, combining a full-sized 8.1-metre swimming channel with a generous 2.2-metre spa annexe. This 6-seat (plus 4 loungers) unit functions as both a serious training pool and a social relaxation hub. Power comes from ten pumps in total: six DXD-320E (2.0HP) units dedicated to the spa zone and four DXD-330A (3.0HP) pumps for the swim current. The control architecture employs three independent Babbitt GS523DZ systems with VL801D panels, allowing precise management of each zone. For those who want the ultimate home wellness centre without building a custom inground pool, the SR859 delivers on every front.
Key Advantages & Features
10-Pump High-Flow Propulsion
No other residential swim spa matches the SR859's pumping capacity. The four 3.0HP swim pumps generate an exceptionally strong, wide current suitable for elite-level training. Six 2.0HP units power the spa side, ensuring every one of the 176 jets receives ample flow.
176-Jet Stainless Steel Array
The sheer number of jets is staggering: 145×50mm direct, 12×3-inch direct, 10×3-inch rotating, three 5-inch direct, two 5-inch rotating, two 5-inch American direct, and two 15-inch U-shape jets (pool side). This allows complete customisation from gentle flotation to deep-tissue percussive massage.
Triple-Zone Independent Control
Three Babbitt GS523DZ controllers with VL801D panels manage the two spa zones (dual panels) and the pool zone separately. This means the spa can be used for therapy while the pool is idle, or both can operate simultaneously at different temperatures.
Advanced Dual Filtration & Ozonation
The filtration system uses two dual-canister housings (with coarse-thread cartridges) and two single canisters. Four 220V ozone generators (each with a dedicated black nozzle) provide industrial-grade sanitation, keeping 25,000+ litres of water crystal clear.
Comprehensive Water Feature Suite
Four 2-inch transparent water diverters, two 1.5-inch cross diverters (pool side), four 1-inch cross air regulators, 18 nine-hole air bubbler nozzles, two bar-shaped waterfalls, eight small fountains, and two single-hole exhaust fountains create a resort-like atmosphere.
Entertainment & Comfort Package
Six KB251 headrest pillows plus one KE1030 pillow support up to 7 bathers. Four large speakers and two oval lift speakers (both 12V) integrate with the optional Bluetooth system. Two champagne buckets (large, black) add a touch of luxury for entertaining.
Technical Specifications
Elite Athlete Home Training Luxury Resort & Wellness Centre Large Estate & Mansion Grounds Multi-Generational Family Compound Physiotherapy & Sports Medicine Facility Site Requirements Electrical Installation First Fill & Commissioning Operational Best Practices Winter & Extended ShutdownApplication Scenarios
Competitive swimmers preparing for triathlons or open-water events will appreciate the SR859's 8.1m length and four 3.0HP pumps. The current can be dialled up to mimic sprint paces, while the separate spa zone allows immediate post-session recovery.
Install the SR859 as a headline amenity. The triple-zone control lets guests choose between active swimming, gentle spa relaxation, or hydrotherapy. The 176 jets and extensive water features create a genuine spa atmosphere, attracting premium clientele.
Homeowners with substantial properties can integrate the SR859 into a landscape design, perhaps alongside an outdoor kitchen and fire pit. The 47 optional LED lights and two champagne buckets turn evening soaks into social events.
Grandparents can enjoy the warm spa zone while grandchildren use the swimming channel. The four loungers offer comfortable resting spots for those who prefer not to fully immerse. The 220cm width provides ample shoulder room.
Clinics specialising in aquatic therapy can use the SR859 for group sessions. The consistent current supports gait training, while the spa zone serves individual patients. The 1.5HP air blower adds bubble massage for sensory therapy.Installation & User Experience
The SR859 needs a reinforced concrete slab of at least 8.4×2.5m with a load capacity exceeding 500kg/m². Access for a crane or low-loader is mandatory – the unit ships fully assembled. Allow 1.5m clearance on all sides for pump and filter access.
Three dedicated 220V/50Hz circuits are required (40A each). Each must have its own 30mA RCD. The control panels can be mounted remotely in a dry equipment room if desired. Use a licensed electrician familiar with multi-pump spa systems.
If the SR859 will be unused for more than a month in freezing weather, drain all zones completely. The extensive plumbing network takes time to drain; use the bottom valves and compressed air to clear residual water. The optional insulation package is highly recommended for year-round operation.
Q1: How much does the SR859 weigh when filled? Q2: Can the three zones operate at different temperatures? Q3: Is the SR859 suitable for saltwater chlorination? Q4: How noisy is the 10-pump system? Q5: What is the expected weekly running cost? Q6: How long does it take to heat the entire volume? Q7: What warranty applies to the 176 stainless steel jets? Q8: Can I customise the jet layout?Frequently Asked Questions
A: Approximately 25,000 kg (25 tonnes). This requires careful site evaluation – a structural engineer should confirm your slab can support the load. The weight is distributed across the 8.1×2.2m footprint, reducing point loading.
A: Yes. Each Babbitt controller manages its zone's heater independently. You could have the pool at 26°C for active swimming, one spa zone at 38°C for relaxation, and the other at 34°C for therapy.
A: The acrylic shell, #304 frame, and stainless steel jets are saltwater-compatible, but the filter housings and pump seals may degrade faster. We recommend a traditional chlorine or bromine system for this model, or consult your dealer for a custom saltwater conversion.
A: At full power, the combined pump noise is approximately 72-75 dB – similar to a vacuum cleaner. Using remote mounting for the pumps (possible with the GS523DZ system) significantly reduces audible noise in the pool area.
A: Assuming 12 hours of filtration, 4 hours of heating, and occasional pump use, expect 30-45 kWh per day in moderate climates. Using the optional insulation package and thick cover reduces this by 25-30%. Actual costs vary with electricity tariffs.
A: Starting from 10°C, the three 3KW heaters (total 9KW) will take 24-30 hours to reach 32°C. Using the cover during heat-up and filling with pre-warmed water (if available) speeds the process. The system then maintains temperature with intermittent heating.
A: The jet bodies carry a 3-year warranty against cracking or leaking. The stainless steel faceplates are warranted for 5 years against corrosion. Damage from imbalanced water chemistry (pH below 7.0 or above 7.8) voids the warranty.
A: To a limited extent. The number of jets in each zone is fixed, but you can swap between direct and rotational types in some positions. For major layout changes, a custom order with extended lead time is possible – contact our sales team.
Copy product links
Long by picture save/share
enquiry form：
Inquiry Content：
You have no items to require
- 中文
- English
Share to： 
|
Copyright© GUANGZHOU SUNRANS SANITARY WARE CO.,LTD
粤ICP备17099389号-2
Contact us
Tel: +86-20-86181657 Email: sales@sunrans.com
Share to
Contact us Tel: +86-020-26231998 Email: sales@sunrans.com Post code: 511300
Copyright © GUANGZHOU SUNRANS SANITARY WARE CO.,LTD 粤ICP备17099389号
