You can submit your requirements here
Size:5750mmx2250mmx1300mm
seat capacity: 5 Persons
Gross weight: 750kg
Packing dimension: 5850mmx2350mmx1400mm
Container load: 1pcs/20ft; 2pcs/40ft
seat capacity: 5 Persons
Gross weight: 750kg
Packing dimension: 5850mmx2350mmx1400mm
Container load: 1pcs/20ft; 2pcs/40ft
The SR858 strikes an intelligent balance between swim training and compact dimensions, measuring 5.75 metres in length while still accommodating up to 4 bathers (3 seats + 1 lounger). Two 3.0HP DXD-330A pumps generate the swimming current, supported by a 2.0HP unit for the spa jets. Unlike larger models, the SR858's reduced footprint makes it feasible for smaller backyards, covered patios, and even indoor pool houses. Despite its size, the specification list reads like a full-scale swim spa: 57 stainless steel jets, twin 3KW heaters, and a sophisticated dual-control Babbitt system. This is the ideal entry point for families who want genuine swim capabilities without dedicating half their garden to a massive installation. Midsize Swim Channel for Realistic Training 57-Jet Stainless Steel System Dual-Zone Control with Shared Interface Efficient Filtration with Ozone Backup Water Feature Package for Ambience Entertainment ReadyProduct Overview
Key Advantages & Features
At 5.75m, the SR858 offers a usable swimming length of approximately 4.8m after accounting for the spa zone. This is sufficient for most adults to complete several strokes before turning, and the twin 3.0HP pumps generate a current that feels natural and responsive.
The jet count includes 47×50mm direct jets, one 3-inch direct, one 3-inch rotating, one 5-inch direct, two 5-inch rotating, and five 5-inch American-style direct jets. This variety covers everything from gentle relaxation to deep tissue work. All faceplates are stainless steel for longevity and visual appeal.
Both the pool and spa sections are managed through Babbitt BP6013G2 controllers with TP600A panels. This unified approach simplifies operation – users can adjust swim current intensity and spa jet pressure from either location. A second panel is included for convenience.
The filtration setup combines two 214-grid housings (with paper cartridges) for the spa and a single canister for the pool. Effective filtration area totals 100 sq. ft. Dual 220V ozone generators (with three black nozzles) keep water fresh, reducing the need for frequent shocking.
Two small fountains, a circulation pump exhaust fountain, and three water level regulators add visual interest. The large and small underwater LED lights illuminate the entire unit, while the 29 optional LED water level lights create a customisable glow.
The SR858 comes pre-configured for Bluetooth audio, with two car speakers (12V) already integrated into the skirt. Adding the P20 Bluetooth music box activates the system. This thoughtful inclusion means you can enjoy music or podcasts during your workout.
Technical Specifications
Suburban Backyard with Space Constraints Covered Patio & Indoor Installations First-Time Swim Spa Buyer Physiotherapy Practice for Active Adults Holiday Rental Upgrade Site Preparation Unpacking & Positioning First-Time Setup Operational Advice Winter CareApplication Scenarios
The SR858's 5.75m length fits where 8- or 11-metre models cannot. Homeowners with modest gardens can finally enjoy swim spa benefits without sacrificing lawn space or upsetting local setback regulations.
A lower overall height (1.3m) and compact footprint mean the SR858 can be installed under a pergola, inside a sunroom, or even in a converted garage. Proper ventilation is still required for indoor setups.
Beginners will appreciate the simpler dual-pump configuration, which is easier to operate and maintain than larger multi-pump systems. The unified control panel reduces learning curve, and the 57 jets provide ample massage without overwhelming complexity.
The 5.75m length supports walking exercises, gentle swimming, and range-of-motion movements. The warm water (maintained by twin 3KW heaters) aids rehabilitation, and the stainless steel jets resist the corrosive effects of saline solutions if used.
Owners of vacation properties can install the SR858 as a premium amenity that differentiates their listing. Its compact size leaves more outdoor space for other activities, while the Bluetooth audio and LED lighting appeal to younger guests.Installation & User Experience
The SR858 requires a level concrete slab of at least 6.0×2.5m with a load capacity of 400kg/m². A single 220V/50Hz 40A circuit is sufficient (unlike larger models requiring two feeds). Allow 800mm access on all sides for filter and pump maintenance.
The unit ships fully assembled on a wooden pallet. Use a pallet jack or forklift for short moves; a crane is rarely needed due to the moderate 805kg dry weight. Once in position, remove the pallet and adjust the ABS base feet for level contact.
If leaving the spa unused in freezing conditions, drain completely using the bottom drain valves. The 304 frame and acrylic shell can withstand occasional frost, but water in the pumps will cause damage. The optional insulation package helps if you keep the spa running year-round.
Q1: Can a tall adult swim effectively in the SR858? Q2: Is the SR858 easier to maintain than larger swim spas? Q3: What is the difference between the 5-inch American direct jets and standard direct jets? Q4: Can I upgrade to a more powerful swim pump later? Q5: How long does the water stay warm with the cover on? Q6: Are replacement filter cartridges easy to find? Q7: What is the typical delivery time for the SR858?Frequently Asked Questions
A: Yes. While the total length is 5.75m, the usable swimming area is around 4.8m – sufficient for 2-3 strokes before turning. Most adults find this adequate for fitness swimming, and the current can be adjusted to suit different stroke rates.
A: Generally, yes. The smaller water volume (approx. 9,000 litres) requires less chemicals, and the single electrical circuit simplifies troubleshooting. The dual filter system still provides thorough cleaning, but there are fewer pumps to monitor.
A: American direct jets have a wider face and produce a broader, flatter water stream – ideal for back and shoulder massage. Standard direct jets offer more concentrated pressure. The SR858 includes both types for massage customisation.
A: The control system is rated for the existing 3.0HP pumps. Installing larger units would require replacing the Babbitt controllers and potentially upgrading the electrical supply. We recommend selecting the correct power level at purchase.
A: With the standard cover, the water temperature drops approximately 2-3°C over 12 hours in moderate conditions. The thick cover reduces this to 1-2°C. Running the heater for 2-3 hours per day typically maintains 32-35°C.
A: Yes. The 214 paper cartridges and coarse-thread cartridge are standard Sunrans items, stocked by all authorised dealers. Generic equivalents are also available, though we recommend genuine parts for best performance.
A: Standard lead time is 25-30 working days after deposit confirmation for a 40ft container shipment. Single units may be available from regional warehouses in North America, Europe, and Australia – contact your local dealer for current stock.
A: A simple PVC step is available as an optional extra (see configuration notes). For easier entry, consider the wooden or heavy-duty PVC ladder options designed for 4-6 metre pools. The spa's 1.3m height is manageable for most adults without a step.

Copy product links
Long by picture save/share
enquiry form:
Inquiry Content:
You have no items to require
